User manual
bvfheating.com
LED INDICATORS
&
BUTTONS DESCRIPTION
- Network LED indicator
ON: Connected to the server
OFF: Not connected to the server
Flash: Connecting to the server,
or no internet connection (restart the router)
- Working LED indicator
OFF: Works normally
Flash slowly: Connecting with Heato thermostat
Flash quickly: Connceting with APP
- Reset Button
Press and hold for 5 seconds to reset the system
- Function Button
a) Press it twice: Connection status with the Heato thermostat
b) Press and hold for 3 seconds: Connection status with the APP
c) Press it once: Back to controller mode
CONNECTION
VIA WIFI
The system is easy to setup. First of all connect the Heato Box with the APP, then connect Heato Box with the Heato thermostat, then the full system is ready to be
controlled.
1. Connecting Heato Box with the APP via WiFi
Download and install the free ”My BVF” application from Play Store or AppStore.
Make sure your device is on the same WiFi network as Heato Box
(connect to the
same router).
a.
Press
+
at the top right corner in the APP to add a device, then enter your own WiFi password
(see picture 2)
.
b.
Press and hold
button
on Heato Box for 3 seconds,
LED
starts flashing quickly.
c.
Press
Start
button in the APP.
LED
stops flashing on the Heato Box if the connection is successfull.
APP will auto change to
picture 3
. If not, please refresh the APP page.
d.
Press and hold
BVF Heato Box
icon, then you can modify the Box name.
2. Connecting Heato Box with Heato thermostat
As you already connected the Heato Box and APP, now you only need to pair the Heato Box with thermostats by following steps.
a.
Press the Function Button
twice on the Heato Box, then the
LED
starts flashing slowly.
b.
Turn off the Heato room thermostat by pressing button, then press and hold the button for 5 seconds, then you can see the RF ID in the top
right of the screen.
Press the button on the Heato thermostat. Pairing is done when the RF ID stops flashing.
c.
Refresh the APP, then you will be able to see the first connected device in a list under the BVF Heato Box MultiSmart
(see picture 4).
d.
Press and hold
thermostat
icon, then you can modify the device name
(see picture 5).
e.
To connect more Heato thermostats (suggested max 8) follow the steps from ”a” again.
v1.7 EN (13.01.2020)
1
2
3
4
5
