15” Panel PC User’s Manual
P49
ACPI Function:
To move a jumper from one position to another, use needle-nose pliers or
tweezers to pull the pin cap off the pins and move it to the desired position.
This item allows you to enable/disable the Advanced Configuration and
Power Management (ACPI).
The choice: Enabled, Disabled.
Power Management:
This category allows you to select the type (or degree) of power saving and is
directly related to the following modes:
1. HDD Power Down
2. Doze Mode
3. Suspend Mode
Min. Power Saving:
Minimum power management. Doze Mode = 1 hr. Standby Mode = 1 hr.,
Suspend Mode = 1 hr., and HDD Power Down = 15 min.
Max. Power Saving:
Maximum power management --
ONLY AVAILABLE FOR SL CPU’s
. Doze
Mode = 1 min., Standby Mode = 1 min., Suspend Mode = 1 min., and HDD
Power Down = 1 min.
User Defined:
Allow you to set each mode individually. When not disabled, each of the
ranges is from 1 min. to 1 hr. except for HDD Power Down, which ranges
from 1 min. to 15 min. and disable.
Video Off Method:
This determines the manner in which the monitor is blanked.
V/H SYNC+Blank:
This selection will cause the system to turn off the vertical and horizontal
synchronization ports and write blanks to the video buffer.
Blank Screen:
This option only writes blanks to the video buffer.
P8
15” Panel PC User’s Manual