Engl
ish
24
2.4 Programming procedure
A
B
C
The display shows three different measures:
The time
(Time; A)
, the hardness of the water
(Hardness; B)
and the
regeneration or recharge time
( Recharge Time, C)
A Setting the time of day
The display shows the time in hours and minutes
(HH:MM)
.
The initial display on start up of bestsoft 4/11 is 00:00.
The first two digits
(showing the hours; HH)
of the display will flash
prompting the installer to set the time with the
[UP]
and
[DOWN]
keys.
Pressing the
[SET]
key confirms the entry.
The digits showing the minutes are flashing now. The
minutes are set by using the
[UP]
,
[DOWN]
keys.
Pressing the
[SET]
key confirms the entry.
B Setting the water hardness
The display has moved into the Set Hardness mode. The dis-
play default is 300 ppm
(typical hardness level)
which indicates a set-
ting suitable for hard water with a value of 300 parts per
million of hardness minerals.
Use the
[UP]
[DOWN]
keys to adjust the setting.
Pressing the
[SET]
key confirms the entry.
