Engl
ish
35
5 Maintenance
5.1 Maintenance work
The operator must regularly perform the following checks to guarantee that the unit functions properly.
Check the level of the brine cabinet and top it up as needed.
Check the water hardness:
The hardness of drinking water and the set blended water hardness must be checked 2x annually and
the hardness of the blended water must be corrected when required (see chapter 3.3 Installation and
Check for leaks, salt level and visual inspection:
Check connection lines and connections for leaks. Check for dirt in the regenerative storage area and
brine cavity every two months and clean and flush with clear water if necessary. The intervals between
checks are recommended minimums and must be adjusted according to site conditions
5.2 Operator responsibilities
All technical equipment requires regular servicing in order to guarantee optimal functionality. Keep
yourself up to date with regard to the quality and pressure ratio of the water which is to be treated. If
the water quality changes, the settings may need to be changed. Consult a specialist if this is the case.
NOTE!
f
Regular checks by the operator are required for the warranty and proper functioning of the unit.
The water softener must be inspected regularly in accordance with the conditions of operation and
use.
Operator checks intervals:
After use:
Refill regeneration salt
2x Annually:
Check pressure
2x Annually:
Check water quality
1x Annually:
Clean brine container
5.3 Maintenance & wearing parts
I
NOTE!
f
Wearing parts must also be replaced within the prescribed maintenance intervals in order to
guarantee functionality and fulfil the warranty conditions. The water softener should be serviced
once a year.
Wearing parts may only be replaced by qualified personnel (fitters or after-sales service team).
We recommend that you enter into a maintenance agreement with your fitter or the aftersales service
team.
Cleaning information:
Do not use alcohol or alcohol based cleaning agents, otherwise the plastic surfaces of the device will
be damaged.
5.4 Disposal and environmental information
At the end of product life please contact BWT Customer Services to arrange a new replacement for
your softener.
Disposal of your softener and any electrical parts (e.g. 0.22 μF capacitor battery, 5.5 V) should only
be carried out at authorised WEEE recycling centres.
