background image

There are 4 different modes: 

Normal

Under certain Open Mic Qty, delegates can randomly speak and stop talking. Chairman Mode, Override, and FIFO 

cannot function in this mode. 

Override

Under certain Open Mic Qty, delegates take turn speaking. For example, if Open Mic Qty is one, it presents that 

only one delegate microphone can be turned on. When the second delegate press 

TALK

 button, the first microphone 

will be overridden and off. Here is another case for setting Open Mic Qty as three. When the forth  microphone is on, the 

first one will be off; when the fifth microphone is on, the second one will be off. In short, always 3 delegates can talk. The 

maximum of 30 delegate microphones can be set as override mode. However, chairman is always unrestricted. 

Chairman

:  Only  chairman  can  speak.  In  this  mode,  if  delegates  would  like  to  talk,  they  should  press  “TALK”  button  to 

request  for  speaking.  Chairman  can  accept  the  request  via  microphone  unit,  main  control  unit,  and  graphical  control 

software. 

FIFO  (First  In,  First  Out)

:  Under  certain  Open  Mic  Qty,  delegates  talk  in  order.  For  example,  if  Open  Mic  Qty  is  one,  the 

second  delegate  should  wait  until  the  first  one  finishes  talking.  Meanwhile,  the  indicator  ring  of  second  delegate 

microphone is red and flashing. In the same condition, if more than 3 delegates press “TALK” button, the indicator ring of 

their microphone will be orange. In short, after the first delegate finish talking, the second delegate microphone will be turn 

on  automatically  and  the  third  delegate  become  the  one  who  should  wait,  and  so  forth.  However,  chairman  is  always 

unrestricted. 

Open Mic Qty 

Press Left/Right button to set the quantity of open microphone. 

Maximum Open Mic Qty: 1-30 or all open mode. 

If the system is under chairman mode, “REQUEST” will be displayed instead of showing the quantity.   

Auto-Off 

Press Left/Right button to set the period that microphones are not in use. 

Auto-Off period: 10-99 seconds or unlimited. 

Advanced Menu 

Press the password: 

【▲

(UP), 

(DOWN), 

(LEFT), 

(RIGHT)

  to enter Advanced Menu list. 

Summary of Contents for FCS 6350




















Reviews: