BYAN SYSTEMS, INC.
Automated Gate and Access Control Products
413 Linden • Lusk, WY 82225 • (800) 223-2926
16
DIP SWITCH ASSEMBLY OPERATION MODE SELECTION;
No.
OPTION ON
OFF
1
REVERSING STROKE FUNCTION
(OPERATOR FIRST WILL CLOSE FOR 1 SECOND)
ACTIVE INACTIVE
2 STEP-BY-STEP
FUNCTION*
ACTIVE INACTIVE
3 AUTOMATIC
CLOSING
FUNCTION
ACTIVE INACTIVE
4
REVERSING BUTTON IS NOT
OPERATIVE DURING OPENING
ACTIVE INACTIVE
5
CLOSING ORDER BY CARS SAFETY CONTACT ACTIVE
INACTIVE
6
SEE NOTE BELOW REF JP1
-------------- --------------
7
CARS SAFETY CONTACT IS
OPERATIVE DURING OPENING
ACTIVE
INACTIVE
*STEP-BY-STEP IS THAT EACH ACTIVATION OF THE REVERSE BUTTON WILL STOP THE
GATE BEFORE CHANGING DIRECTION.
NOTE: THERE IS A JUMPER JP1 (BELOW THE REMOTE CONTROL CARD
CONNECTOR) THAT CAUSES THE SELECTABLE OPTION No. 6 IN THE FOLLOWING
MANNER:
JP1 OPEN:
No. 6
ON
IN THE POWER ON STATE, UNIT WILL DO A CLOSING
FUNCTION
.
OFF
IN THE POWER ON STATE, UNIT WILL DO AN OPENING
FUNCTION.
JP1 CLOSED:
IN THE POWER ON STATE, THE DOOR REMAINS PAUSED. IN
THIS CASE, THE SWITCH No. 6 CONTROLS THE FUNCTION OF
THE TRAFFIC LIGHTS.
ON
THE TRAFFIC LIGHTS CARD WILL ACT AS A FLASHING LIGHT
CARD (UPPER RELAY) AND A GARAGE LIGHT CARD (LOWER
RELAY).
OFF
THE TRAFFIC LIGHTS CARD WILL ACT AS GREEN AND RED
LIGHTS.
