Manufactured By
:
Byan Systems, Inc.
413 Linden
Lusk, WY 82225
(307)334-2865
(800)223-2926
Wiring Instructions
Byan Systems G2M Control Board
ONLY
Commercial Power:
Connect incoming commercial power to TB1 using method described on page one of this
manual.
Gate Control System:
Connect outgoing power to TB2 in the battery back-up using included wiring
1. 115VAC Hot (Black)
2. 115VAC Neutral (White)
3.
Earth Ground (Green)
Connect outgoing power to the high voltage terminal block on the G2M control board
not
installed in a Byan Systems prewire.
1.
115VAC Neutral (White)
2.
115VAC Hot (Black)
Or the power-in terminal block (TB1) on the Byan Systems prewire.
2. 115VAC Hot (Black)
3.
115VAC Neutral (White)
4.
Earth Ground (Green)
Gate Control Functions:
Connect supplied function control wiring harness to TB3 in a battery back-up to accessory
terminals on the G2M control board not installed in a Byan Systems prewire.
SBBI TB3
G2M Accessory Terminals
1 Empty
Not Used
2 Black
18 master board
3 White
16 master board
4 Green/ jumper from 3
16 master board
5 Brown
19 master board
6 Red
19 slave board
7 Jumper from 8
16 slave board
8 Green
16 slave board
9 Blue
18 slave board
10 Empty
Not used
Control Function wiring may also be connected to corresponding terminal blocks on the Byan
Systems prewire:
SBBI
12x10 G2M
20x16 G2M
24x20 G2M
TB3 TB3
TB5
TB5 & TB7
3,4 & 7,8 Green 23
Green 23
Green 23
2 & 9
Purple 24
Purple 24
Purple 24
5 & 6
Orange 25
Orange 25
Orange 25
