MAST MAINTENANCE
SERVICE MANUAL
34
(1) Clearance between the outer mast and the middle mast.
(2) Clearance between the middle mast and the inner mast.
(3) Clearance between the inner mast and the carriage.
Mast Removal and Installation
1. Removal
(1) Use a reliable hoisting strap to the hang the hoisting hole of the mast, and secure the strap with a safety hook.
(2) Lift the mast to expose the mast mounting bolts, block the mast by the wood, and then remove bolts.
(3) Lower the mast fully, and then disconnect the fittings and hoses of the main lift cylinders.
(4) Slowly set the mast down on the flat floor or sturdy pallets.
11
11
11
11
12
12
Code
Name
QTY
Information
11
Bolt Assy M14×35
4
100 N-m
12
Screw M10×40
2
30 N-m
2. Installation
Follow the removal steps in reverse to install the mast. After Installation, adjust the clearance between the mast and the carriage.
Carriage Removal and Installation without Removing Mast
1. Removal
(1) Lower the mast fully, and then remove the retainer and the bolt on the top side of the mast.
(2) Use a reliable hoisting strap to the hang the upper beam of the carriage, and secure the strap with a safety hook.
(3) Remove the chain nuts to separate the carriage and chains.
(4) Hoist the carriage out of the mast, and then set the carriage down on the flat floor or sturdy pallets.
Summary of Contents for EPS14
