TRANSPORTATION AND STORAGE
OPERATOR MANUAL
32
EPS14P
33
OM-EPS14P2019001-EN
LOADING, TRANSPORTATION AND UNLOADING
Hoisting
(1) Lowering the fork fully.
(2) Hoist the truck by the hoisting hole on top side of the mast.
Danger
During the hoisting process, it must be ensured that no one is within the working range of the
hoist.
。
Warning
Use only a hoisting equipment with sufficient loading capacity (Refer to the vehicle nameplate
in detail for the weight of the vehicle).
Driving into the Transport vehicle
Drive the forklift into the transport vehicle on turtle speed mode.
Caution
(1) Have a supervisor or a second person on site as a lookout.
(2) Make sure that the ground is strong enough to avoid the transport vehicle sinking into the
floor.
(3) Secure the transport vehicle with fixed block.
(4) During loading and unloading, constantly check the rigidity and the stability of the ramp.
Transporting and Unloading
(1) Use a transport truck or a low flat bed truck to transport the forklift
(2) Unloading the truck by hoisting follows the same procedure as the loading of the truck.
(3) When driving the forklift out of the transport vehicle, reverse the forklift with caution at low
speed. The rest of the procedure is the same as required for driving the forklift onto the
transport vehicle.
Summary of Contents for EPS14P
Page 1: ...EPS14P OPERATOR MANUAL OM EPS14P2019001 EN...
Page 2: ...EPS14P OPERATOR MANUAL OM EPS14P2019001 EN...
Page 38: ......
