4. STEP: TUSKS ASSEMBLY
Each TUSK uses a special slot-‐n-‐hook system so it is the weight of the phone/tablet that makes it
lock tight down. If you slide them contrary to the weight, then will easily come off.
To snap them in place, insert the top hook tab on the TUSK in a CW 45º angle on the top slot on
the FACE plate. While you push it in, rotate the TUSK CCW to its final position, aligning the
bottom tab with the bottom slot on the FACE plate.
THAT IS IT!
Your ELEPHANTOM is now assembled and ready to make your Drone an even more versatile filming
machine.
To disassemble your ELEPHANTOM just reverse all the steps.
Please visit the product page for more instructions and Videos on how to
assemble/disassemble and USE your ELEPHANTOM.
Check it out at: http://ELEPHANTOM.bymac.org
CAUTIONS USING YOUR ELEPHANTOM
While using your ELEPHANTOM with your drone on ground shots, remember that because of your
drone not having the propellers running it can get hotter than usual. Especially the wifi module
inside it. To prevent overheating, we recommend not leaving your drone ON for long periods at a
time. In our tests we normally interval a 15 min use, with a 5 min cool off period and never had a
problem.
NOTICE
No real animals were harmed creating your ELEPHANTOM.
ELEPHANTOM
and
ELEPHANTOM MAMMOTH
are a
byMaC Inventions
design and product.
We do not have any relation to any brand of drones our products are compatible with.
“smart people do smart things”
http://www.bymac.org
