background image

TROUBLESHOOTING

Volts  

~115V

Running AMPS  

6.0

Minimum Operating 

55°F (12.5°C)  Allow to acclimate 

Temperature 

to room temperature if stored  

 

below 55°F (12.5°C)  

Frequency  

60 Hz

Standard Hose Length   7 ft. (2.13 m)

Dimensions  

25 3/8 in. (64 cm) H x 10 1/16 in.

 

(26 cm) W x 17 1/8 in. (43 cm) L

Air Line Pressure  

35 psi (2.4 Bar)

Weight – Empty  

43 lbs (20 kg)

Weight – Full  

59 lbs (27 kg)

Shipping Weight  

52 lbs (24 kg)

Flow Rate  

110–130 mL/min

Potential Issue

Damage to nozzle 
assembly 

Damage to peristaltic 
pump tubing

Dirty exterior sprayer 
surfaces

Potential Issue

No power

System is not 
switched on

Compressor shuts off 
suddenly or won’t run 
while depressing the 
sprayer trigger

Compressor has  
overheated

Unit stalls upon  
initial spray

Corrective Action

Inspect for damage and faulty 
parts. If present, contact  
Service Tech Team.

Replace pump tubing. Visit 
www.servicetechteam.com  
to request replacement parts.

Clean exterior surfaces with  
70% isopropyl alcohol.

Corrective Action

Verify the unit is plugged in and  
on a known working power outlet

Depress power switch to illumi-
nate, or toggle power switch to 
the ON position.

This is a sign that the unit’s circuit 
breaker has tripped or the com-
pressor has overheated. The user 
should look for physical objects 
that could be loose or stuck in  
the ventilation openings and 
clear/ dislodge. Flip the power 
switch back to the “ON” posi-
tion. If the problem persists, the 
user should let the unit sit for 30 
minutes to see if it’s an overheat-
ing issue. If the unit still refuses to 
restart after 30 minutes, the user 
should contact Service Tech Team.

Allow the unit to sit for a minimum 
of 30 minutes with the power off.

If the air compressor does not 
come up to speed when pressing 
the trigger, this may be a sign  
that the unit has been stored  
below 55°F (12.5°C). 

If unit has been stored where  
temperatures are below 55°F 
(12.5°C) move the unit to a warm 
environment and allow the unit  
to acclimate before operation.

EXCESSIVE NOZZLE DRIPPING

SYSTEM WILL NOT TURN ON 

OR HAS SHUT OFF SUDDENLY

NOTE: DO NOT USE

 a chemical in the unit that is not a ByoPlanet

®

 

-approved product. If you encounter the issues listed below, 
use the suggested troubleshooting methods. If you encounter 
an issue that is not addressed in this manual, contact Service 
Tech Team at

 www.servicetechteam.com.

10  |  ENGLISH 

BYOPLANET.COM

Volts  

~240V

Running  AMPS  

3.0

Minimum Operating 

55°F (12.5°C)  Allow to acclimate 

Temperature 

to room temperature if stored  

 

below 55°F (12.5°C) 

Frequency  

50 Hz

Standard Hose Length   7 ft. (2.13 m)

Dimensions  

25 3/8 in. (64 cm) H x 10 1/16 in. 

 

(26 cm) W x 17 1/8 in. (43 cm) L

Air Line Pressure  

35 psi (2.4 Bar)

Weight – Empty  

43 lbs (20 kg)

Weight – Full  

59 lbs (27 kg)

Shipping Weight  

52 lbs (24 kg)

Flow Rate  

110–130 mL/min

SPECIFICATIONS FOR 240V MODEL

SPECIFICATIONS FOR 115V MODEL

Summary of Contents for MS-700













Reviews: