background image

WARNINGS

WARNINGS

• 

Do not operate the unit when  
fatigued or under the influence  
of drugs or alcohol.

• 

Use fluids and solvents that are 
compatible with equipment wetted 
parts. See technical data in all 
equipment manuals. Read fluid  
and solvent manufacturer’s  
warnings. For complete information 
about your material, request SDS 
from distributor or retailer.

• 

Do not leave the work area while 
equipment is energized.

• 

Turn off all equipment when not  
in use.

• 

Check equipment daily. Repair or 
replace worn or damaged parts 
immediately with genuine  
replacement parts from trusted 
ByoPlanet

®

 partners only.

• 

Do not alter or modify equipment. 
Alterations or modifications void 
your ByoPlanet

®

 MS-700™  

warranty and agency approvals, 
and create safety hazards.

• 

Route hoses and power cords away 
from traffic areas, sharp edges, 
moving parts and hot surfaces.

CHEMICAL USE HAZARD

Each chemical, such as a disinfectant, has a unique set 
of hazards and needs to be handled properly to ensure 
worker safety.

 

• 

The ByoPlanet

®

 MS-700™ Electrostatic Sprayer can 

only be used with products that have been approved 
by ByoPlanet

®

. Never spray any liquid product that is  

not a ByoPlanet

®

-approved product. The ByoPlanet

®

 

MS-700™ Electrostatic Sprayer warranty is voided if 
the ByoPlanet

®

 MS-700™ Electrostatic Sprayer is used 

with products that are not approved by ByoPlanet

®

Be aware that many chemical liquids can be harmful  
if they are not used properly.

• 

Read and understand the ByoPlanet

®

-approved  

product’s SDS and label prior to use.

• 

Be aware of first-aid procedures related to the  
product in use.

• 

It is a violation of Federal law to use a chemical in  
a manner inconsistent with its label.

• 

Use personal protective equipment as detailed by  
the ByoPlanet

®

-approved product’s SDS.

• 

For use with non-flammable, non-combustible and 
non-volatile fluids only. Never spray a flammable 
chemical (flash point less than 140°F [60°C]).

• 

Ensure the area being sprayed has proper ventilation.

• 

Store all chemicals in original containers in a cool,  
dry place, away from heat and open flames.

• 

Do not reuse or refill a chemical container.

• 

To dispose of ByoPlanet

®

-approved products refer  

to product labels.

Safety Decal 

This decal is located on the top-most deck surface forward 
of the bottle storage location.

PERSONAL PROTECTIVE EQUIPMENT

Wear appropriate protective equipment when in the work 
area to help prevent serious injury.

• 

Refer to product specific ByoPlanet

®

 Safety Data  

Sheets (SDS) for any additional Personal Protective 
Equipment (PPE).

EQUIPMENT MISUSE HAZARD

Misuse can cause death or serious injury

4  |  ENGLISH 

BYOPLANET.COM

WARNINGS

Always wear appropriate Personal Protective  
Equipment (PPE), as detailed in the User  
Manual, when using this device. Refer to  
product specific ByoPlanet

®

 Safety Data  

Sheets (SDS) for any additional PPE. 
Follow instructions and precautions listed on 
ByoPlanet

®

 manufacturing product labels. 

Only use ByoPlanet

®

-approved products through  

the ByoPlanet

®

 MS-700™ Electrostatic Sprayer.

Inspect power cord, sprayer and external tubing 
for damage prior to use. DO NOT use if damage 
is present.
Always use with a grounded electrical plug 
and outlet.
Use device only as intended. Direct spray only  
toward appropriate surfaces.

Cuando use este dispositivo, siempre use el equipo de 
protección personal (EPP) apropiado, como se detalla 
en el Manual del Usuario. Consulte las Fichas de Datos 
de Seguridad (SDS) para cualquier EPP adicional. 
Siga las instrucciones y precauciones que se listan en 
las etiquetas de fabricación del producto ByoPlanet

®

Utilice solamente productos ByoPlanet

®

 aprobados  

por el Atomizador Electrostático MS-700™.

Antes de usarlo inspeccione el cable de electricidad, el 
atomizador y la tubería externa por daños. NO lo use si 
hay daños presentes.
Siempre usarlo con un enchufe y toma de corriente 
eléctrica con conexión a tierra.
Solamente utilice el dispositivo para lo que fue 
diseñado. Solo rocié directamente en las superficies 
adecuadas.

Au moment d’utiliser le pulvérisateur, toujours porter 

un équipement de protection personnelle (ÉPP) 

adéquat, tel que décrit dans le manuel de l’utilisateur. 

Se reporter à la fiche signalétique du produit nettoyant 

ByoPlanet

®

 afin de connaître tout autre ÉPP requis 

pour son emploi.
Suivre les instructions et les mises en garde indiquées 

sur l’étiquette d’origine de chaque produit ByoPlanet

®

.

Utiliser le pulvérisateur électrostatique MS-700™ 

uniquement avec les produits ByoPlanet

®

 approuvés 

à cette fin.

Avant l’emploi, inspecter le cordon d’alimentation, 

l’appareil lui-même et les tubes externes pour vérifier 

l’absence de dommages. NE PAS utiliser le  

pulvérisateur en présence de dommages.
Toujours brancher le pulvérisateur dans une prise de 

courant avec mise à la terre.
Utiliser le pulvérisateur strictement selon le mode 

d’emploi. Toujours diriger le jet directement vers les 

surfaces à traiter.

Summary of Contents for MS-700













Reviews: