allow for bag contraction.
2. Open the lid and place the open end of the bag down into the vacuum
slot.
3. Close the lid by pressing down on both sides
until two ’’click’’ sound
heard.
4.
Press the ’’PULSE’’ button continually, till it reaches the pressure that
you want. You can watch the vacuum bag to decide the pressure. During
this process, you can stop vacuum by stop pressing this button; and
press it again to vacuum again.
5.
When the pressure reaches what it needs, press ’’SEAL ONLY’’ button
to start sealing.
6. Once the indicator light has turned off, press the release buttons on both
sides of the machine to release the bag.
How to Vacuum Canisters
NOTE :
Canister is not included. The accessory hose may not fit all
canisters.
1. Connect the vacuum sealer to the mains.
2. Put the items you wish to vacuum pack in the canister. Place the cover
on top of the canister, make sure the canister cover is closed properly.
3. Connect the vacuum sealer and the canister via the accessory hose.
You must connect one of the ends to the canister valve and the other
end to the accessory port of the machine.
4. Lower the lid of the machine and press the sides to secure it, the system
is properly closed when you hear a
“click” on each side.
5. To start the vacuum process
, press the “Canister” button.
6. To cancel the vacuum process
, press the “Cancel” button.
7. Once the vacuum process is complete, the machine stops automatically.
Then it is safe to disconnect the accessory hose from the machine and
the canister.
