13
3.2.2 Applications
Finishing initialization, it can receive and execute the IR commands. Press the remote controller button, the indicator light is
flashing; release the button, the indicator light stops flashing. Users can control the pan/tilt/zoom, setting and running preset
positions via the IR remote controller.
Key Instruction:
1. In this instruction, “press the key” means a click rather than a l
ong-press, and a special note will be given if a long-press for
more than one second is required.
2. When a key-
combination is required, do it in sequence. For example,“
【
*
】
+
【
#
】
+
【
F1
】
”means press“
【
*
】
”first and then
press“
【
#
】
” and last press“
【
F1
】
”.
1)
Camera Selection
Select the camera address to control.
2) Pan/Tilt Control
Up: press
Down: press
Left: press
Right: press
Back to middle position: press“
【
HOME
】
”
Press and hold the up/down/left/right key, the pan/tilt will keep
running, from slow to fast, until it runs to the endpoint; the
pan/tilt running stops as soon as the key is released.
3)
Zoom Control
ZOOM IN: press “ZOOM
“ key
ZOOM OUT: press “ZOOM
” key
Press and hold the key, the camera will keep zooming in or
zooming out and stops as soon as the key is released.
4) Focus Control
Focus (near):Press “
【
focus+
】
” key (Valid
only in manual focus
mode)
Focus (far): Press “
【
focus-
】
”key (Valid only in manual focus
mode)
Auto Focus: Support
Manual Focus: Support
Press and hold the key, the action of focus will keep continue and
stops as soon as the key is released.
5) BLC Setting
BLC ON / OFF: support
