24
Audio configure
Including audio compressing format,sampling frequency,sampling precision,compressing code rate
settings etc.
Video configure
Including video encoding,video parameters,character-overlapping,character size,video output
setting etc.
Network configure
Including basic parameters,Ethernet,DNS,wireless network setting,
GB28181
etc.
System configure
Including equipment property,system time,user management,version update,Reset,Reboot device
settings etc.
1) Local configuration
Video Preview Mode
: user can choose real-time priority or fluency priority: The delay will be small when under real time
priority mode and fluency will be good when under fluency priority mode. Setting based on the user need (Default value: real time
normal (2),real time best (1),fluency normal (3),fluency good (4) and fluency best (5))
Recording packing time(minute)
: Set recording video packing time (default is 10,range from 1~120 minutes)
Recording/Snapshot file storage route
: Set local recording video/snapshot file storage route.(Default D:\MyIPCam\)
Click the
Save
button to make settings effective.
2) Audio Configuration
Switch
: Choose to enable the audio or not.
Compressing format
:Set audio compressing format and the device will reboot automatically after change (default
MP3,PCM,AAC optional)
Sampling frequency
:Set sampling frequency and the device will reboot automatically after change (default 44100,16000,32000
and 48000 optional)
Sampling precision:
Set sampling precision (default 16bits)
Compressing code rate:
Set audio compressing code rate (default 64bits,32,48,96,128bits optional)
Note Click “SAVE”,it will remind”
Enable has changed. Restart the device to take effect after the success of the
save.”,then please
reboot the camera to make new setting effect.
4.2.5 Video configuration
1) Video encoding
Code stream:Stream:
Different video output mode setting,use different streams. (Main stream,secondary stream)
Compression Format:
Set the video compression format,save and reboot to take it effect (primary / secondary stream
default:H.264,H.265 optional)
Video Size:
Set video image resolution,save and reboot to take it effect (main stream default 1920 * 1080 or 1280 * 720 optional;
default secondary stream 640 * 320,320 * 180,1280 * 720,1920 * 1080 optional )
Stream Rate control:
Set rate control mode,save and reboot to take it effect (Primary / secondary stream default variable bit
rate,fixed rate is for option).
Image Quality:
Set the image quality,image quality can be changed only when rate control is variable bit rate,(main stream defaulted
is better,secondary stream default is not good,there are best,better,good,bad,worse,worst for options).
Rate (Kb / s):
Set the video bit rate (main stream default 4096Kb / s,64-12288Kb / s optional; secondary stream default 1024Kb /
s,64-10240Kb / s optional).
Frame rate (F / S):
Set the video frame rate (primary / secondary stream default 25F / S,primary stream 5-60F/S optional,secondary
stream 5-30F / S optional ).
Key frame interva
l: Set the key frame interval (primary / secondary stream default 75F,primary / stream 1-300F optional. secondary
stream 1-150F optional).
Stream Name: When streaming via rtsp or rtmp, user can modify stream name. Main Stream(live/av0), sub stream(live/av1)
Click the "Save" button to display the "saved successfully" message,then settings take effect.
2) Stream Release
Switch:
To turn on/off the main / secondary stream.
Protocol:
primary / secondary stream applies RTMP protocol.
Host Port:
server port number (default 1935,0-65535 optional)
Host Address:
server IP addresses (default 192.168.5.11)
Stream Name:
choose a different stream name (live / av0,live / av1 optional).
User:
Set the user name.
Password:
Set the password.
Click on the "Save" button to display the "Save successful" message,then settings take effect.
Method of obtaining RTSP: rtsp: // device IP address: 554 / live / av0 (av0 main stream; av1 secondary stream)
3) Video Parameters
a,Focus: Focus mode,focus range,focus sensitivity can be set.
Focus Mode: set the focus mode (the default auto,manual optional)
