C&K Securitech
5
8 AUX DC Detector power.
The auxiliary power is provided from connections marked 'AUX'. This is to
provide the 12 v supply for detectors e.g. PIR's. The auxiliary power output is
rated 500 mA max. (12 v nominal).
**PLEASE NOTE BELLBOX CONNECTIONS AT REAR OF MANUAL**
MOUNTING A REMOTE KEYPAD
1) Having identified the position of the remote keypads to be fitted, mark the
holes for the mounting position.
2) Screw the backbox in the agreed position.
3) Note the rear entry of cabling
WIRING A REMOTE KEYPAD
1) The remote keypads require 6 core cable for their connection to the main
control panel.
2) Connect the cable as shown below in diagram C
3) Individual keypads do not need to be identified to the system. (i.e. addressed)
DIAGRAM C
SETTING OPTIONS.
The Active 5 can be operated with a remote keyswitch or remote keypad.
Three methods of setting may be used.
i) Timed exit
ii) Exit terminate
iii) Door sense setting