background image

  Copyright 2015 © C. B. Gi

Ʃ

y Cra

Ō

er Supply                                                                             1 

 

Maybe you’d like to play a little love song for the apple of your eye, or possibly plink your way over 

the island rainbow like the late, great IZ. Maybe you’re looking to build your first instrument by hand. 

No matter what your motivation, you too can play soft, mellow tones on your very own hand-built ci-

gar box ukulele in no time. 

 

This guide will walk you through the assembly of the C. B. Gitty Cigar Box Ukulele kit. Using just a few basic 

tools you will construct a fully playable, great-sounding and awesome-looking concert (also known as alto) 

cigar box ukulele, sure to be the envy of friends and 

neighbors alike. The ukulele is a very fun and easy-to-

play instrument with a unique, happy sound, and your 

cigar box uke will provide many hours of musical enjoy-

ment. 

 

Kit Inventory

 

Refer to the labeled photo above to identify each of the parts in your kit. Verify that everything is present and 

that you are familiar with what’s what. 

 

A.  Plain Wooden Craft Box 

B. 

Hardwood ukulele neck blank

 

C. 

Rosewood ukulele fret board

 

D. 

Set of nylon ukulele strings

 

E. 

Rosewood ukulele bridge

 

Cigar

 

Box

 

Ukulele

 

Kit

 

Assembly

  

Instructions

 

Product Number 36

009

01

 

View this guide in full color online: 

www.CBGi y.com/CBUkeKit 

Need Parts?

  

 

Visit 

www.CBGi y.com/ukulele

parts/

 for 

our full line of uke parts and hardware! 

Summary of Contents for 36-009-01















Reviews: