C. B. Gitty Crafter Supply Cigar Box Ukulele Kit Assembly Instructions Manual Download

Page: 12 / 14

y Cra

er Supply 12

5—T

Once your strings are installed, the construction

part of this kit is complete.

Congratulations,

you have finished your ukulele!

Now all that’s

left is to get it strung up and get busy playing!

Step 1—Get your Ukulele in Tune

This ukulele is tuned to G C E A, with G being the top string (when held in playing position) and A being the

bottom string.

If you have a digital chromatic tuner, you can easily use that to tune your ukulele, especially if it has a Ukulele

mode. For a good visual and audio reference, we recommend

www.ukutuner.com

, which gives you the pitch

of each string, as well as a nice representation of the headstock.

To help you get started playing your ukulele, above are some of the more common chords that you’ll want to

learn. In the diagrams, the vertical lines represent the four strings of the ukulele (the leftmost being the top

string when you are playing, the rightmost being the bottom string), and the circles tell you where to put your

fingers. The open circles at the top of the diagram indicates an open (unfretted) string.

Using just these chords, you can play a large number of both traditional and popular songs, from folk to coun-

try to rock and pop. You should be able to follow along with any printed or online sheet music or tablature that

shows the guitar chords. There are many sites online that present tablature and chords for popular songs,

such as

www.ultimate-guitar.com

and others.

Step 3—More How-to-Play Resources

There are many online resources for how to play the ukulele, including a growing library of video how-to les-

sons over at

www.CigarBoxGuitar.com

. C. B. Gitty also sells a How to Play the Ukulele book that includes

an audio CD. Find it at

http://www.cbgitty.com/books

. You can also search on YouTube for “ukulele les-

sons” and find a wealth of free how-to info.

We hope that you have enjoyed this process of building your ukulele from this kit, and that you will

Figure 25

Figure 26

Figure 27

Summary of Contents for Cigar Box Ukulele Kit














Search results

Summary of Contents for Cigar Box Ukulele Kit

Reviews:

Related manuals for Cigar Box Ukulele Kit

Brands by name

Popular brands

C. B. Gitty Crafter Supply Cigar Box Ukulele Kit, Assembly Instructions Manual

Search results

Summary of Contents for Cigar Box Ukulele Kit

Reviews:

Related manuals for Cigar Box Ukulele Kit

Brands by name

Popular brands