Wiser Home Controller User's Manual
17
closes this port. The port is closed by default. This feature is intended to
allow installers to use C-Bus Toolkit to manage a C-Bus network remotely
when they need to. IT IS IMPORTANT TO MAKE SURE TO CLOSE THE PORT
AFTER USE. LEAVING IT OPEN ALLOWS ANYONE TO MANIPULATE YOUR
C-BUS NETWORK.
Projector Control
allows the web user interface to function even when run
remotely over the Internet. This feature is intended to allow an end-user or
installer to interact with their C-Bus network even when outside of their
home or premise.
Project Update
allows a PICED project to be uploaded to the device over
the Internet. This means that anyone on the Internet, if they knew the
Internet address of your device, can connect to the device and transfer a
project to the unit and/or retrieve a project from the unit. It is important to
make sure to close the port after usage as leaving it open will allow anyone
to manipulate your C-Bus network.
5.5.2 Configure
Router
Settings
You can access the router to view or change the settings. Some of the
settings relate to network security and wireless operation and might require
you to make a change
Changing settings on the router can cause unexpected results.
Unless you are absolutely certain, do not attempt to modify the
settings.
To open the router setup screen display, use the Configure Router button
on the Tools page. Most of the router setting screen fields require text
entries. After making a change, it must be saved. Saving changes causes the
router to reboot
5.5.3 C-Bus Time and Date
The C-Bus Date and Time widget on the Tools page allows you to set the
network time from the Wiser UI.
