C-COM Satellite Systems Inc.
Page 9 of 38
3) Push the lock plate towards the lower reflector assembly, and lock the two (2)
threaded knobs.
4) Attach the elevation motor assembly to the tripod assembly by sliding the elevation
bracket between the tripod assembly and the washers of the T-handled threaded
knobs. You may have to loosen the knobs before insertion.
When the elevation bracket is locked into place, tighten the two (2) T-handled
threaded knobs such that the washer firmly grips the bracket to the tripod assembly.
Facing the back of the reflector, the elevation motor should be facing left.
Note:
Avoid twisting
the bellows when
handling the elevation
motor assembly.
iNetVu
®
Flyaway User Manual
