11
Spray Gun
Locate the spray gun (HGSR) and lance inside the spray tank (Gun for SR35 will be located in the shipping
box).
For SR35 the self store hose simply needs to be pushed into the push lock fitting as per the picture below left
For the SR50 screw the lance onto the spray gun trigger handle as per above right. SR80 models have the
lance fitted to the trigger handle.
Screw the spray gun onto the hosetail connected to the spray hose, ensure it is secured tightly so that the
handle does not leak when operated (do not use thread tape as this may cause the trigger handle to split).
Secure the spray gun in the stowed position under the two lugs of the auxiliary (hose reel) tank as shown. This
method of securing the spray gun is unique to the SR50 and SR80 tanks and is designed for the HGSR spray
gun only. On SR35 units the handgun mounts are on either side of the tank
Connect the Sprayrider™ electrical connector (at front of the tank) to the battery cable.
SR50/80 Style
SR35 Style,
Push fit
Summary of Contents for SPRAYRIDER Generation 2
Page 19: ...19 SR50 80 PARTS DIAGRAM...
Page 22: ...22 SR35 PARTS DIAGRAM...
