C-Dax SPRAYRIDER Generation 2, Owner'S Manual

8 

ATV COMPATIBILITY 

 
The Sprayrider™ Generation 2 models have been designed to fit the widest range of ATVs. At time of release 
the Generation 2 models were designed to fit all available Honda, Yamaha, Suzuki, Kawasaki, Polaris and 
Bombadier models available in New Zealand.   
 
For reasons of stability it is not recommended that 80L models be fitted on the front of your ATV. 
 
50 litre models fitted on the front of ATVs where there is a gear lever mounted on the guard , must be offset to 
the left to allow the transmission lever to be placed in the park position. 
 
SR35 is best suited for rear carrier mounting, mounting to front carriers may cause tank failure. 

INSTALLATION 

 
All Models 

Unpack the sprayer and check the contents. The following parts are included (Some parts are packed inside the 
tank); 
 

Tank unit with pump and cover(no cover on SR35 units), suction valves and hoses, filter basket and lid 

Auxiliary tank unit (not fitted to SR35) and delivery hose

Battery cable assembly (includes remote switch) 
Vacuum release valve  
Spray gun (lance and handle may be disassembled) 
Ratchet tie down strap 
Operators manual 

CAUTION 

To avoid damage do not attempt to remove the suction hoses from inside the tank. 

Battery Cable 

Locate the battery cable and attach it directly to the ATV battery terminals.  

CAUTION 

To avoid damage to Sprayrider™ accessories take care to ensure that the red wire is connected to the positive 

terminal.