C.E.C. HD53N, Owner'S Manual

8

Front Panel Functions

❶

❷

❸

❹

❺

❻

❶

POWER button

Push the POWER button to turn HD53N ON respectively OFF. 

When HD53N is turned ON the display will blink “INPUT” and “XLR” or 

“RCA” indicators during the unit is in starting-up. Approximately 20 seconds 

later once the display changes to indicate the selected INPUT and light up a 

gain setting (“LOW GAIN” or “HIGH GAIN”) and output (“HEADPHONE” or 

“SPEAKER”) indicators, HD53N is ready for use.

Starting input and output are the last selected input and output when HD53N 

was turned off. Press 

❺

INPUT selector button and 

❸

HP/SP selector button 

to change to different input and output.

Note: When you need to turn the power OFF and back ON again, wait for 

least 20 seconds after turning the unit OFF to prevent malfunction.

Before turning HD53N ON or OFF, turn the volume knob to the 

minimum to avoid a switching noise or sudden and big sound from 

the headphones or speakers, which may result in damaging the 

headphones or speakers, or injuring your ears. Headphones or 

earphones should be taken off before HD53N is turned ON and OFF.

❷

HEADPHONE Output

Headphone output is a combination type of two standard 6.3mm headphone 

and a balanced XLR jacks.

A)Headphones with 6.3mm plug

For Standard headphones with a 6.3mm plug there are two outputs with 

different output impedances.