1.3.
Installation
Choosing a Location
Note: SmartFeed is very sensitive to weight fluctuations. To get as accurate of a
weight reading as possible, please follow these rules:
1. Choose a location where no grass or plants will grown under the bin
2. Ensure the bin is completely suspended by its load cell bars.
3. In windy environments, use solid obstructions, such as plywood, sheet metal, or
other types of shelter to block as much wind as possible.
4. Ensure nothing is leaning against the bin. This includes wires, plants, farm tools,
or other equipment.
5. Check regularly to ensure that feed has not fallen below the SmartFeed bin and is
piling up.
Anchoring the Frame to the Ground
Caution! SmartFeed is front-heavy and can tip over easily if not anchored
appropriately. Please use caution when moving or installing the system to prevent
from injury or damage. ALWAYS ANCHOR ALL FOUR CORNERS OF SMARTFEED
FIRMLY TO THE GROUND.
1. Select a location that will not allow the animals to access the feed bin from
behind. Alternatively, place a fence around the SmartFeed to prevent access from
behind.
2. Make sure the unit is on a level surface by placing it on flat pieces of metal,
wood, or concrete.
3. Use rebar or ground anchors to secure the frame to the ground. See Figure 2 for
reference.
5
