C-LOGIC 410-TC, Instruction Manual

10

Key operation

No.

Symbol

Description

A

Rotary button

Clockwise rotation for increasing the value 

B

Rotary button

1. 

1. 

Under turn on state, a short press switches between manual 

and automatic mode. 

2. 

2. 

Under turn on state, a long press (3 seconds) allows to enter in 

the setting screen.

3. 

3. 

In other screens, it acts as confi rm key. 

C

Rotary button

Anticlockwise rotation for decreasing the value

D

Short press for power on / off. 
Long press (3 seconds) for screen locking or unlocking.

Main setting screen

Mode

Explanation

 Automatic

 mode

A short press of the rotary button enables the automatic mode, displaying the    
icon.

Manual mode

Other short press of the rotary button enables the manual mode, displaying the  

 icon. Under this mode, it is possible to adjust the set temperature by rotating 

the button clockwise (increasing the temperature) or anticlockwise (decreasing 
the temperature). When room temperature is lower than setting temperature, 
the heating contact will be closed and the cooling contact will be opened  ( icon 
is displayed) and when room temperature is higher than setting temperature, the 
heating contact will be opened and the cooling contact will be closed (  icon will 
disappear)

Temporary 

manual mode

Under automatic mode and unlock state, when rotating the button to adjust the 
temperature, it will enter into temporary manual mode. This temporary mode 
works to next interval when it will return to the automatic mode. If you want 
to return to manual or automatic mode, please press the button once or twice 
respectively

Press the rotary button for 3 second for entering in the setting screen. Rotates the button to select 

the required icon and press the button to confi rm the access to that setting.

Mode

Explanation

Frost 

protection 

mode

After entering into setting screen, rotate rotary button to select     icon and 
press the key in order to enable the frost protection mode. 
The default temperature under the frost protection mode is 5ºC. It protects pipes 
from frost.