background image

-Medical Devices Industry Association recommends the patients using a pacemaker not to use RF 
using devices such as cell phones, wireless modems and so on because using those devices in the 
range of 15cm from the pacemaker may affect the pacemaker. In an inevitable situation, make it 
sure to keep the distance of more than 15cm between the modem and the pacemaker. To minimize 
the possible interference, use the modem on the opposite side of the pacemaker. Do not use it if 
possible. 
   
-If you use a medical device, ask the manufacturer if the device is free from the RF energy. Some 
hospitals use RF medial devices. Separate the modem from a notebook PC or a PDA when 
entering a hospital. 
   
-The modem may affect the functions of a hearing-aid. 
   
-The places banning use of cell phones may require prohibit use of modems. 
   
-Separate the modem from a notebook PC or PDA we you get on an airplane.   
 
-Separate the modem from a notebook PC or PDA to avoid interference with explosive operations 
at a blasting area or a place posted    Turn off a walkie-talkie . And follow all the instructions shown 
in the area. 
   
-Hold yourself in installing or using the modem at the places such as danger areas of gas leakage, 
chemical storage facilities, decks of a vessel and so on. Sparks may occur when you install the 
modem onto a notebook PC or a PDA on rare occasions.   
 
   
 
 
 
   
 

Summary of Contents for CDU-550



























Reviews: