Figure 9: Battery compartment of the CN-Keypad keypad
The device can connect no more than four wireless keypads, and the device can work with all simultaneously.
2.4.1
Arming and Disarming
The device has the ability to arm and disarm several partitions with one user code. The partitions that can be
armed or disarmed with a specific code are configured during the device configuration.
Arming
To arm a partition, it is necessary to press the “house” icon and enter the user code.
∙
if the code is correct, then the site (partition) will be armed, the keypad will confirm the arming by turning
on the red LED. Or the countdown of the exit delay will start, which will be accompanied by a sound and
LED indication.
∙
if the code is incorrect or the user who owns this code has more than one partition, the keypad will display
an error.
∙
if arming is not possible, the keypad will display an error.
Figure 10
If several partitions are assigned to the user, then first the user shall click the “house” button, select the partition,
which state he/she wants to change, and then type the code.
Figure 11: Example of arming of partition No. 1 with code 1234
22