Arming Rejection
“Arming rejection” is the impossibility to arm the site, if the security alarm on the site is faulty, or arming is
prohibited due to lack of payment for security services.
There are the following reasons for arming rejection:
∙
malfunction of one or more zones;
∙
alarm in one or more zones;
∙
no communication with the panel program via IP channel;
∙
absence of 220V on the site;
∙
no payment for security services;
∙
the device case is opened.
Disarming
If the user can control only one partition, to disarm it is necessary to enter the user code.
∙
if the code is correct, then the site (partition) will be disarmed. The keypad will confirm disarming by turning
on the green LED;
∙
if the code is incorrect or the user, who owns this code, can control several partitions, the keypad will display
an error.
Figure 12
If the user can control several partitions, to disarm them, it is necessary to type the partition number, then # and
enter the user code.
∙
If the code is correct, then the partition will be disarmed. The keypad will confirm disarming by turning on
the green LED.
∙
In case of repeated disarming of the same partition, the keypad will display its status: the green LED will
turn on.
Figure 13: Example of disarming of partition No. 1 with code 1234
The exit or entry delay countdown is indicated by the intermittent sound, which is reproduced during the entire
delay interval. The sound indication of the exit or entry delay is disabled when any button on the keypad is pressed.
2.4.2
Getting Information about Status
The K14-LED keypad has green and red LEDs:
∙
Red LED is lighted when a partition is armed.
∙
If the partition is disarmed, the green LED is lighted.
∙
Red and green LEDs flash simultaneously if an error occurs. For example, if an incorrect user code is entered
or in case of arming rejection.
23
