Figure 104
This tab displays a list of sites that are available to the engineer for configuration at the moment. The list and
duration of the permissions are set in the Security Center software.
To configure, click the corresponding site number.
6.3.2
Working with Configuration
The opened window for setting up the device is similar to the configurator intended for setting up the device
connected to the computer, which is described in the “Configuration” section:
Figure 105
When you open the settings window from the device, its current configuration is read. Then it is possible to make
the necessary changes and write them to the device with the corresponding button. After a successful download of
the configuration, the message “Settings saved for writing to device” appears on the device.
Important:
configuration reading and change are only available for devices that are currently connected to the
“Cloud”. Otherwise an error message will be displayed: “Communicator installed on site is not currently connected
to Cloud. Please try to connect to site later.”
Note that some configuration fields, for example, addresses to connect to the remote control, cannot be remotely
changed. This excludes the possibility of remotely breaking the connection of the device with the receiver and
92
