Operator Manual
BBL Page 109
Initial issue: 09/13
Latest revision: -
12 .10 bbl loading
Adjust the position of the separators in order to obtain the appropriate size for the book block.
A maximum of
3
holes can be left free between
2
consecutive separators. Make sure that
each separator is correctly placed into its slot.
Load the book blocks in the BBL against the registered table on the operator side, placing the
side that has to be bound at the bottom, according to the selected mode (
1
to N, centered or N
to
1
). See chapter
"4.6.2 In "WITH COVER" mode:", page 53
.
The BBL allows the operator to insert book blocks of variable height (
127
to
320
mm or
15
.
1
to
12
.
6
in.) and of variable thickness (
1
to
60
mm or
0
.
04
to
2
.
36
in.) in a same set.
Only the book block’s variable width requires a manual adjustment on the BBL.
Summary of Contents for BB3002 PUR
