Operator manual
Page 9 - 15
Initial version : 11/08
Lastest revision : -
3.3.2 Stitching possibilities depending on paper width
On demand before delivery, the machine can be equipped with 4 heads brackets but only 2
heads. In this case it could be upgraded with 2 additional heads.
Corner stitching
The middle of the stitch is placed at
14mm from the side (left or right) of the
sheet and at 7mm from the lead edge of
the sheet. You must clutch and activate
the used head (s).
To avoid severe mechanical interferences which could lead to serious damages,
unclutch the unused heads when it is asked on User Interface.
Paper width
119 (4.7") to 218 mm
(8.6 ")
218 (8.6") to 268
(10.5")
268 (10.5") to 370
(14.6")
Machine Type
Stitch
position
2 heads on 2
bracket heads
2 saddle or
top
Space between stitches = 80 (3.1") to paper width - 28 mm
1 corner
YES (left or right)
2 heads on 4
bracket heads*
2 saddle or
top
"Space between
stitches =
80 (3.1") to paper
width - 28mm (middle
brackets**)"
"Space between
stitches =
80 (3.1") to 190
(7.5") (middle
brackets**)"
"Space between stitches
=
80 (3.1") to 190 (7.5")
(middle brackets**) and
240 (9.4") to paper width
- 28 mm (outside
brackets**)"
1 corner
YES (left or right
middle brackets**)
Not possible
YES (left or right outside
brackets**)
4 heads
2 saddle or
top
"Space between
stitches =
80 (3.1") to paper
width - 28mm (middle
heads)"
"Space between
stitches =
80 (3.1") to 190
(7.5") (middle
heads)"
"Space between stitches
=
80 (3.1") to 190 (7.5")
(middle heads) and
240 (9.4") to paper width
- 28 mm (outside heads)"
4 saddle or
top
Not possible
"Space between middle
stitches =
80 (3.1") to paper width
-188 mm"
1 corner
YES (left or right
middle head)
Not possible
YES (left or right outside
heads **)
* Requires installation of heads on proper brackets (middle or outside ones)
** Stitching head position at installation
7mm
0.27"
14mm
0.5"
7mm
0.27"
14mm
0.5"
