Operator manual
Page 9 - 43
Initial version : 11/08
Lastest revision : -
5.3.3 Trimming parameter
Press the button "TRIMMING" to have access to the trimming parameters.
Four adjustments are available:
1 - Trimming function selection.
Trimming option activated (go to the three additional options described below).
Trimming option not activated (go directly to output conveyor parameter).
2 - Booklet final length selection.
Determine the value through the numerical keypad, validate "
V
" .
3 - Trimmer conveyor height choice.
The trimmer conveyor height set itself is automatically in relation to the booklet thickness.
The operator may adjust this height.
4 - Active or deactive the blower to evacuate the chips.
"
V
" Validation of the adjustment parameters entered in the different screens.
"
X
" Cancel the last values entered in the defined job.
Maximum
height
Maximum
height
1
2
3
4
