6
GB
F
-
-
USER COMBINATION
- Open Lock
- Change Combination
WRONG TRY PENALTY
- Four consecutive invalid combination initiates five minute delay period.
LOW BATTERY WARNING
- Repeated LED flashing and beeping duringopening indicates battery
is low and needs immediate replacement.
AUDIO AND VISUAL SIGNAL
- Double signal - two LED flashes and two beeps -
indicates entry is valid or accepted.
- Triple signal - three LED flashes and three beeps -
indicates invalid or not accepted.
EATURES
MANAGER COMBINATION
Add/Remove User
Enable/Disable User
GENERAL
Lock without mechanical emergency opening.
Change the manager code immediately. Do not use personal data (birthday)
as a code. Keep the code from unauthorized personal.
OPENING THE LOCK
1. Enter valid six digit combination. (Factory set to 1-2-3-4-5-6)
2. The lock will confirm a valid combination entry with a double signal.
3. Within four seconds, turn handle to the open position.
4. Pull door open.
=>
Invalid Combination Entry
- Lock will signal three times.
OPERATING
WRONG TRY PENALTY
-
Entry of four consecutive invalid combinations starts a five minute delay period.
=> LED flashes red at ten second intervals.
-
At the end of the delay period, two more consecutive invalid combinations will restart
an additional five minute delay period.
CHANGING YOUR COMBINATION
ALWAYS PERFORM THIS OPERATION WITH THE DOOR OPEN
1. Enter “zero” six times.
2. Enter your existing six digit combination one time.
3. Enter your NEW six digit combination two times.
4. If a mistake is made wait thirty seconds and repeat steps
1 - 3
.
5. Test lock operation several times before closing the door.
Valid Combination Entry
- Double signal after valid six digit combination is entered.
Invalid Combination Entry
- Triple signal indicates old combination is still valid.
