Visit us at
crlaurence.com
for international toll free information 3
A
C.R. LAURENCE Co., INC.
GENERAL SAFETy RULES
e) Do not overreach. Keep proper footing and balance at all times.
This enables better control
of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves
away from moving parts.
Loose clothes, jewelry or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities, ensure
these are connected and properly used.
Use of these devices can reduce dust related hazards.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct power tool for your application.
The correct
power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn ON and OFF.
Any power tool that cannot
be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing power tools.
Such preventive safety measures reduce the risk
of starting the power tool accidently.
d) Store idle power tools out of the reach of children. Do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool.
Power tools are dangerous
in the hands of children.
e) Properly maintain power tools. Check for misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the power tool's operation. If damaged, have the
power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc., in accordance with these instructions and
in the manner intended for the particular type of power tool, taking into account the working
conditions and the work to be performed.
Use of the power tool for operations different
than intended could result in a hazardous situation.
5) SERVICE
a) Have your power tool serviced by a qualified repair person using only identical replacement
parts.
This will ensure that the safety of the power tool is maintained.
SPECIFIC RULES FOR SAFE OPERATION
1) AVOID ACCIDENTAL STARTING.
Make sure the switch is in the "OFF" position before
plugging in.
2) ALWAyS SWITCH OFF AND WAIT.
Wait for the sanding belt to come to a complete stop
before any type of adjustment or maintenance.
3) kEEP HANDS AWAy FROm mOVING PARTS.
4) ALWAyS WEAR A DUST mASk OR RESPIRATOR.
The mask filter should be
replaced regularly.
5) NO EATING, DRINkING OR SmOkING
should be done in the work area to prevent
ingesting glass particles.
