Using the Signal Generator:
Direct Connection
Direct Connection to a Street Lighting Column
The position and route of street lighting or car park lighting
cables can be determined by using a Signal Generator and the
pipe connection method.
Follow the same rules as for connecting the Signal Generator
to a metal pipe except attach the red direct connection lead to
the OUTSIDE of the lamp column.
WARNING NEVER open the lamp column door to gain access to the cables, this is dangerous and not necessary.
NOTE Make sure that the direct connection crocodile clip is not insulated from the metal of the column by paint.
NOTE If the column is concrete attach the crocodile clip to the metal surround of the access door.
16
