※
The turning deceleration set is used to control the turning and deceleration of the scooter. If the
turning and deceleration functions are abnormal, please check whether the micro switch connector
is loose. If the connector is normal, please replace with a new micro-switch.
※
Some scooters do not use the turning and deceleration set and may instead adopt the gyroscope
to achieve turning and deceleration functions. For more details, please refer to Gyroscope Maintenance.
The arrow on the micro-switch box must be aligned with the arrow on the micro switch launch pad.
27
5-3 Turning deceleration set maintenance :
※
Cross tool x 1pcs
1.Refer to 3-1 Powering off the battery to power off the scooter.
2.Please refer to 5-1 Front slanting maintenance to remove the front slanting.
3.Remove the turning deceleration set connector.
4.Remove the locking screw (M4 x 13L x 2pcs).
5.The turning deceleration set can now be removed.
※
Please follow the above steps in reverse for reassembly and replacement.
•
Gyroscope maintenance (Optional):
1.Refer to 3-1 Powering off the battery to power off the scooter.
2.Please refer to 5-1 Front slanting maintenance to remove the front slanting.
3.Remove the gyroscope connector.
4.Remove the locking screw (M4 x 12L x 2pcs) from the bottom of scooter.
5.The gyroscope and holder can now be removed.
6. Remove the holder screw (M3 x 6L x 2pcs)
7. The gyroscope can now be removed.
※
Please follow the above steps in reverse for reassembly and replacement.
4.
5.
3.
5.
3.
6.
4.
