34
7-1 Seat board maintenance :
※
Hex wrench 13 x 2pcs
1.Refer to 3-1 Powering off the battery to power off the scooter.
2.Please remove the seat first.
3.Remove the seat board locking nut (M8 x 4pcs).
4.Remove the seat rail screws (M8 x15L x 4pcs).
5.The entire seat can now be removed.
7-2 Seat holder adjustment :
※
Hex wrench 17 x 2pcs
1.Refer to 3-1 Powering off the battery to power off the scooter.
2.Remove the seat and rear shroud lower cover.
3.Remove the fixing screw set of the seat holder (M10 x55L x 1pc).
4.The entire set of the seat holder can now be removed.
*Please follow the above steps in reverse for reassembly and replacement.
4.
3.
5.
※
If the seat rail is abnormal or stuck, etc., please replace
with a new seat part immediately.
※
If the seat's tipping regulator malfunctions or the leather
is damaged, please replace the entire seat immediately
and follow the above steps in reverse to reassemble the
seat rail / seat board.
130+-13kgf-cm
200+-20kgf-cm
300+-30kgf-cm
4.
4.
※
The seat holder is the connection between the frame and the seat board. If it is
damaged, please replace with a new one immediately.
