Product information Wireless data loggers
58
HD35.11K
Pair of flanges made of anodized aluminum alloy for the fixed installation of base unit, repeaters and data loggers
in housing for indoor use. Pin for padlock and padlock included.
HD35.24W
Flange in anodized aluminum alloy for fixing to the wall the models HD35EDW... in waterproof housing (versions
L=80 mm, H=120 mm).
HD35.24C
Kit including the HD35.24W flange and a clamp for fixing the flange to a
∅
40…50 mm mast.
HD35.37
Pair of flanges in anodized aluminum alloy for fixing to the wall the models HD35EDW... in waterproof housing
(versions L=120 mm, H=80 mm).
HD35-BAT1
3.7 V lithium-ion
rechargeable
battery, capacity 2250 mA/h, 3-pole JST connector. For the base units HD35AP…
and the repeater HD35RE.
HD35-BAT2
3.6 V lithium-thionyl chloride (Li-SOCl
2
)
not rechargeable
battery, size A, 2-pole Molex 5264 connector. For the
alarm module HD35ED-ALM and the data loggers HD35ED….
BAT-2013DB
3.6 V lithium-thionyl chloride (Li-SOCl
2
)
not rechargeable
battery, size C, 2-pole Molex 5264 connector. For the
repeater HD35REW and the data loggers HD35EDWK/4TC, HD35EDWS/xTC, HD35EDWH and HD35EDLM…TC.
HD2003.71
40 mm diameter mast kit, height 2 m, in two pieces.
HD2003.75
Pointed grounding rod for 40 mm diameter mast.
HD2003.78
Flange for 40 mm diameter mast, to be fastened on the floor.
HD2005.20
Anodized aluminum tripod kit with adjustable legs for installing environmental sensors. It can be fixed on a flat
base with screws or to the ground with pegs. Max. height 2 m.
HD2005.20.1
Anodized aluminum tripod kit with adjustable legs for installing environmental sensors. It can be fixed on a flat
base with screws or to the ground with pegs. Max. height 3 m.
HD75
75% RH saturated solution for checking the relative humidity sensors, supplied with threaded ring for 14
mm diameter probes M12
×1 thread.
HD33
33% RH saturated solution for checking the relative humidity sensors, supplied with threaded ring for 14
mm diameter probes M12
×1 thread.
HD31.B3A
Adapter for the calibration of the CO
2
sensor with the can. Only for the models HD35EDW... in waterproof hous-
ing.
Agence Île de France
paris@c2ai.com
Agence Est
mulhouse@c2ai.com
Agence Sud-Ouest
sudouest@c2ai.com
Service Export
export@c2ai.com
Siège social Lyon
/ 9 rue de Catalogne - Parc des Pivolles - 69153 Décines Cedex / +33 (0)4 72 15 88 70 /
contact@c2ai.com
e
contact@c2ai.com
l
www.c2ai.com
