9. Web GUI User Guide
The Matrix can be controlled by Web GUI. The operation method is shown as below:
Step 1:
Get the current IP Address.
The default IP address is 192.168.1.100. You can get the current Matrix IP address in two ways:
The first way:
You can get the IP address via panel buttons. On the initial OLED display, press
“MENU” button to enter the IP interface, then press “UP/DOWN” button to check the current
IP address.
The second way:
You can get the IP address via ASCII control
.
Send the command “ r ipconfig!”
through an ASCII Command tool, then you’ll get the feedback information as shown below:
IP:192.168.62.109 in the above figure is the IP Address of the Matrix (the IP address is
variable, depending on what the specific machine returns).
For the details of ASCII control, please refer to “10. ASCII Control Command”.
Step 3:
Input the IP address into your browser on the PC to enter Web GUI page.
After entering the Web GUI page, there will be a Login page, as shown below:
Select the Username from the list and enter the password. The default passwords are:
Username
User Admin
Password
user admin
- 9 / 20 -
Step 2:
Set the IP address of the PC to be in the same network segment with the Matrix.
