2.Installation Guide
To install
Important :
After receiving the C4L5200-USB, check for any shipping damages on the
carton and the system unit before proceeding with any installations. Inspect the
cartons for any obvious damage before unpacking.
Step 1 >
Plan the installation of your powerline network
Note :
You will need at least two powerline adapters in order to build a powerline
network connection.
1. To connect two computers together in an isolated network you will need the
following ;
●
CrossPower C4L5200-USB adapter( Node mode) for each PC with an USB port
or
●
CrossPower C4L5200-ETH adapter( Node mode) for each PC with Ethernet port
To set up files to be sharing, two things must be done.
●
The computer with files to be shared must be set up for file sharing.
●
The other computer on the network must be connected to that computer.
To setup a computer to share its files:
6
Window 98: File sharing is by default switched off. Enable file sharing by highlighting
the network adapter in the list of adapters in the “Control Panel”-> Network list.
Click the ‘File and Print sharing’ button and select file sharing. This may require your
Windows 98 installation CD.
