Charging the Accumulator
- Connect the cablift to a mains outlet, use the rolling up power cord (
).
- Switch on the cablift on the switch (
1
).
- The green LED flashes during the charging process.
CAUTION !
Do not open the machine during charging!
- If the charging process is finished the green LED remains on.
- Disconnect the cablift from the mains outlet.
The power cord winds up automatically.
CAUTION !
Make sure that the power cord is rolled up slowly and equably!
When winding up the power cord un-breaked, it could be damaged!
1
Maintenance
We reccommend to check sthe state of charge at least
every 30 days.
NOTICE !
The accumulator should be charged daily after the end of work,
so that it is guaranteed the cablift is ready for operation the
following day.
An overcharging of the accumulator is not possible.
CAUTION !
Please avoid in any case the complete discharge of the accumulator!
Switch off the cablift with switch (1) if it is tipped and not reloaded
for several days.
The switch must
be online for charging!
