Blow Applicator with Swing Cylinder
10
cab - Produkttechnik GmbH & Co KG
2
3
1
2
3
1
Installing the Service Unit
Fig. 4d Installation of the Service Unit on the Apollo
Fig. 4e Installation of the Service Unit on the Hermes
1. Fasten the service unit (
1
) at the back of the
Apollo
and/or the
Hermes
using the washers and the screws .
2. Insert the tube of the service unit (
2
) into the push-in-T-fitting (
3
)
at the external blow valve.
Insert tube firmly.
