Applicator - Error Messages
B-1
cab - Produkttechnik GmbH & Co KG
Appendix B - Error Messages
Error Messages of the Printer
Detailed information about printer errors (e.g. 'Paper out', 'Ribbon out',
etc.), their causes and correction methods can be found in the
Operator's manual of the printer (Appendix C).
With the installation of an applicator the error treatment expands. This
means in particular, that after correcting the error and
before
the
correction is quit with the
key, an additional label feed has to be
released using the
key. This synchronizes the process of printing
and labelling. Possibly dispensed blank labels have to be removed
manually.
After quitting the error message the label caused the error will be
printed once more.
Error Messages of the Applicator
The following table gives an overview of error messages and their
possible cause. It also suggests methods to resolve the problem.
After error correction, always quit the error message of the applicator
with the
key.
To reprint the label where the applicator error occurred, a new print job
has to be released.
