9
3
Implementing
3.1
Required Space
min. 150 mm
min. 250 mm
print direction
Fig. 5
Disengaging or pivoting the applicator
3.2
Tools for the implementing
Screwdriver with parallel blade
2.5
To adjust the throttle valves and
product sensor
Hexagon key L-wrench
0.8
To adjust the sensors
(in contents of delivery)
2.5
For matched norm parts
(in contents of delivery)
4
Pad adjustments
Changing pad
Flat-round nose
straight
To mount/dismount tubes
angled
Open spanner
SW 5.5 90°
To change the pliers aperture
SW 8
To change the throttle valves
SW 13
Setting the spring power on the
adapter bolt
SW20
Changing the cylinder
Adjustment tool for the tamps
cab part No.:
597285
Mounting the tamps
