12
12
3 Operation
3.6
Mounting & dismounting the Applicator
3
3
2
1
4
5
Fig.8
Mounting/dismounting the applicator
!
Attention!
Danger of crushing to hands and fingers by the swinging motion of the applicator!
When releasing the locking pins be aware of the downward motion caused by the weight of the applicator.
1. To dismount the applicator (5) for cleaning or loading material pull both locking pins (3) outward from the control
unit.
2. Raise the applicator (5) with pulled out locking pins (3) so that the they snap into the holes (4) of the mounting
plate (2).
3. Remount the applicator (5) by pulling out the locking pins (3) and moving the applicator toward the printer untill
the locking pins (3) can snap back into the holes (1) of the mounting plate (2).
