32
33
8
Media
8.4
Cut-out Mark Dimensions
Labels with cut-out marks
Endless material with cut-out marks
for marginal cut-out marks
minimum liner thickness 0,06 mm
Fig. 22
Cut-out mark dimensions
Dim. Designation
Dim. in mm
A
Label distance
> 2
N
Width of cut-out mark
for marginal cut-out
> 5
> 8
P
Height of cut-out mark
2 - 10
X
Distance mark - material edge
for A2+
for A4+, A4.3+, A6+, A8+
5 - 26
5 - 53
Y
Sensor recognized virtual label front edge with gap sensor recognition
Rear edge cut-out
Z
Distance recognized front edge - actual label front edge
Adjust software settings
0 up to A-P
Table 11
Cut-out mark dimensions
Marginal cut-out
Long hole cut-out
Rectangular cut-out
Circular cut-out
Not recommended !
Cut-out
between the labels
Not recommended !
Fig. 23
Samples for cut-out marks
Feed direction
