3
2
1
Introduction
1.1
Instructions
Important information and instructions in this documentation are designated as follows:
Danger!
Draws your attention to an exceptionally grave, impending danger to your health or life.
!
Warning!
Indicates a hazardous situation that could lead to injuries or material damage.
!
Attention!
Draws attention to possible dangers, material damage or loss of quality.
i
Notice!
Gives you tips. They make a working sequence easier or draw attention to important working processes.
Environment!
Gives you tips on protecting the environment.
Handling instruction
Reference to section, position, illustration number or document.
Option (accessories, peripheral equipment, special fittings).
Time
Information in the display.
1.2
Intended Use
•
The device is intended exclusively as a peripheral device for the cab printers of the A+ series for checking of
printed linear barcodes and 2D codes. For that purpose the printer must be operated in peel-off mode and each
label must contain one code only. Any other use or use going beyond this shall be regarded as improper use. The
manufacturer/supplier shall not be liable for damage resulting from unauthorized use; the user shall bear the risk
alone.
!
Attention!
To operate the Code Checker the firmware version 3.17 or higher is needed !
•
The device is manufactured in accordance with the current technological status and the recognized safety rules.
However, danger to the life and limb of the user or third parties and/or damage to the device and other tangible
assets can arise during use.
•
The device may only be used for its intended purpose and if it is in perfect working order, and it must be used with
regard to safety and dangers as stated in the operating manual.
•
Usage for the intended purpose also includes complying with the operating manual, including the manufacturer‘s
maintenance recommendations and specifications.
i
Notice!
The complete documentation can also currently be found in the Internet.
