6
67
1.3 Intended Use
• The device is manufactured in accordance with the current technological
status and the recognized safety rules. However, danger to the life and
limb of the user or third parties and/or damage to the device and other
tangible assets can arise during use.
• The device may only be used for its intended purpose and if it is in perfect
working order, and it must be used with regard to safety and dangers as
stated in the operating manual.
• The device printer is intended exclusively for printing suitable materials.
Any other use or use going beyond this shall be regarded as improper use.
The manufacturer/supplier shall not be liable for damage resulting from
unauthorized use; the user shall bear the risk alone.
• Usage for the intended purpose also includes complying with the operating
manual, including the manufacturer‘s maintenance recommendations and
specifications.
i
Notice!
The complete documentation is included in the scope of delivery on
DVD, and can also currently be found in the Internet.
1.4 Safety Instructions
• The device is configured for voltages of 100 to 240 V AC. It only has to be
plugged into a grounded socket.
• Only connect the device to other devices which have a protective low
voltage.
• The device may only be used in a dry environment, do not expose it to
moisture (sprays of water, mists, etc.).
• Do not use the device in an explosive atmosphere.
• Do not use the device close to high-voltage power lines.
• If the device is operated with the cover open, ensure that people‘s
clothing, hair, jewelry etc. do not come into contact with the exposed
rotating parts.
• The device or parts of it can become hot while printing. Do not touch
during operation, and allow to cool down before changing material and
before disassembly.
• Risk of crushing when closing the cover. Touch the cover at the outside
only. Do not reach into the swivel range of the cover.
• Perform only those actions described in this operating manual.
Work going beyond this may only be performed by trained personnel or
service technicians.
• Unauthorized interference with electronic modules or their software can
cause malfunctions.
1
Introduction
