background image

4

4

1.1  Instructions

Important information and instructions in this documentation are designated 

as follows:

Danger!

Draws your attention to an exceptionally grave, impending danger 

to your health or life.

!

Warning!

Indicates a hazardous situation that could lead to injuries or 

material damage.

!

Attention!

Draws attention to possible dangers, material damage or loss of 

quality. 

i

Notice! 

Gives you tips. They make a working sequence easier or draw 

attention to important working processes.



Environment!
Gives you tips on protecting the environment.

Handling instruction

Reference to section, position, illustration number or document.

Option (accessories, peripheral equipment, special fittings).

Time

Information in the display.

1.2  Intended Use

•  The device is intended exclusively as an option for the EOS4 printers for 

dispensing suitable materials that have been approved by the manufac-

turer. Any other use or use going beyond this shall be regarded as 

improper use. The manufacturer/supplier shall not be liable for damage 

resulting from unauthorized use; the user shall bear the risk alone.

•  Usage for the intended purpose also includes complying with the operating 

manual, including the manufacturer‘s maintenance recommendations and 

specifications.

Introduction

Summary of Contents for EOS4 P













Reviews: