34
cab Produkttechnik GmbH & Co KG
10. Maintenance / Cleaning
The
Gemini
is designed with a minimum of maintenance requirements. The
most important concern is the regular cleaning of the thermal printhead. This
will guarantee a consistent quality print image. It will also help to avoid
premature wear of the printhead. Otherwise, maintenance is limited to an
occasional general cleaning.
Adjustments ar needed only on an occasional basis. In general, the printer will
not vary its performance. Adjustments may be necessary by a change in
media (see chapter 7). If a very narrow or thick media will be used, adjustment
of the printhead support may be needed. If a different type or width of ribbon is
loaded, adjustment of the transfer ribbon feed may be needed to maintain
wrinkle-free operation.
Before beginning any maintenance, turn off the power and disconnect the
power cord!
General Cleaning
Remove particles of dust and paper that have accumulated inside the printer
with a soft brush.
Wipe the cover with a standard non-abrasive cleaner as needed.
Accumulations of dirt on media rollers and guides can impair the smooth
movement of media. After removing media, remove deposits with isopropyl
alcohol and a soft cloth.
Cleaning the Media Feed Roller
Accumulations of dirt on the roller can lead to impaired material transport.
Clean the roller as follows:
1. Open the printhead.
2. Remove labels and ribbon from the printer.
3. Remove all deposits with isopropyl alcohol and a soft cloth.
F
